Know The Type Of Cracks On The Wall And How To Handle It

One of the problems that often arise on the walls of a room or building is the appearance of cracks in certain parts of the wall. In addition to reducing the quality and strength of buildings, cracks that are present on the wall will also make the beauty of the view space becomes less. The types of cracks in the walls are two, namely structural and non-structural cracks. For structural, the cause is a shift of land on the location of the built house, if this type of crack, it is necessary to take action as soon as possible, because if too late handling will cause the strength of the building to be reduced. The characteristic of this structural crack is always to start from the top corner toward the wet and produce a diagonal line. But there are also cracks that form follow the arrangement of bricks. To overcome this it is better you contact the experts through our website at www.lewisvillefoundationrepairexperts.com.

The cause is because the column and foundation which is the source of strength for the wall to support the load are shifting, this is the result of shifting soil unstable condition so that when disaster strikes like an earthquake it will be easy to change its composition. Vibrations that often occur around the building can also lead to the presence of this structural crack, for example, drilling that makes the ground become vibrating, it could be because the ground there is a cavity or water flow, so that if the load is too heavy soil surface is also more easily experienced decline. To improve the fracture of structures that can be done is to improve the column and the foundation of the shift so that it can be strong again. How to? You can make a mixture of cement, limestone, and sand put into the soil around the foundation and at the bottom.

After that just repair the cracked wall, the way is to disassemble the cracked area and then patched back with bricks, while the second way is to connect again the cracked walls with iron bones formed like staples. The trick is to dismantle the cracked wall plaster, then the iron staples are installed to connect the cracked bricks, then closed again with a plaster in the form of cement and sand dough, in this way then the pull of a brick that strong. Usually, if the structural crack is present then the process does not occur at once so before making any repairs, wait a few days or weeks and after the cracking process completely stopped a new process improvement can be done.